Call Us for recommended license installers in your area

Goodman 16 SEER 5 Ton Heat Pump Single Stage

0 Review(s) Write a Review
Your Price: $3,235.00
Part Number: 92
Availability: Back Order.

Overview of Goodman 16 SEER 5 Ton Heat Pump Single Stage System

Sorting and choosing the right HVAC system for your home is always a hard task considering the massive number of HVAC companies offering their HVAC systems. However, Goodman does a good job of standing out among the crowd of Trane systems and Carrier systems, by fitting their HVAC machines with all the right features to make itself out to be the perfect HVAC system for your home.

For starters, the 16 SEER 5 Ton system is equipped with a state-of-the-art heat pump. The GSZ16 has the best quiet condenser fan motor in addition to SmartShift® Defrost Technology. Furthermore, it supports quiet operation in more ways than one. And, as an added layer of protection, it is fitted with a factory-installed bi-flow liquid line filter drier. Finally, for reliability, the GSZ16 uses a factory-installed heater band and suction line accumulator and employs a heavy-gauge galvanized steel enclosure cabinet to protect it all.

The air handler in this system brings a lot to the table as well. For starters, it features an all-aluminum evaporator coil which is very efficient in heat transfer. Next, variable-speed motors are employed alongside field-installed electric heat and field-installed heat strips. Moreover, for additional support and robustness, the air handler has a SmartFrame™ substructure.

To wrap it all up, the heat kit brings an arsenal of important benefits which increase the capabilities of the air handler. The heat kit has a superior combination of sequencers, multiple branch capabilities, control circuitry, factory-installed circuit breakers, and rust-resistant nickel chromium heat elements to achieve its efficiency and performance goals.

Specifications: -

General Information

 

Operating Mode

Heating and Cooling

Configuration

Multi-Position

Performance

 

Cooling Capacity

55000 BTU

Heating Capacity

60000 BTU

Capacity

5.0 Tons

Nominal Cooling Capacity

60000 BTU

SEER

16.0

EER

12.5

Maximum Air Flow

1810 CFM

Dimensions

 

Product Weight

473 lbs

Shipping Weight

493 lbs

Certifications

 

ETL Listed

Yes

AHRI Certified

Yes

AHRI Reference Number

8996210

 

 

Goodman 16 SEER 5 Ton Single Stage Heat Pump – GSZ160601

To fulfill all responsibilities assigned to the heat pump, it employs several important features. For starters, the quiet condenser fan motor used in the heat pump supplies the condensing coil with the right amount of air, consistently. Moreover, due to its advanced three-blade design, the fan motor is able to accomplish this quietly.

To support the efficiency of the heat pump, it is equipped with state-of-the-art copper tubing which and an aluminum fin condenser coil configuration. In addition to this, the SmartShift® defrost technology used in the system is able to make the transition into defrost mode quieter and smoother.

Next, to further reduce the operational noise of the system, Goodman has acoustically engineered the top of the cabinet to introduce sound control enhancements which makes the heat pump much better at suppressing noise than other systems without sound control mechanisms.

To ensure that the heat pump remains acceptably easy to clean and does not lead to the formation of molds in duct, Goodman has fitted it with a factory-installed bi-flow liquid line filter drier. This helps reduce ac repair costs by eliminating the need for mold removal during air duct cleaning.

Goodman has also taken steps to ensure that the heat pump remains operational even at extreme temperatures by using a factory-installed heater band and suction line accumulator.

Finally, to keep everything safe, Goodman has used a louvered cabinet with a baked enable finish on the outside.

Specifications: -

General Information

 

Type

Condenser

Operating mode

Heating and Cooling

Refrigerant Type

R-410A

Installation location

Outdoor

Compressor Stages

Single

DOE Regional Compliance

Nationwide

UPC

663051583245

Performance

 

Cooling BTU

60000

Cooling Capacity

60000 BTU

Capacity

5.0 Tons

SEER

16

Maximum sound level

76 dB

Electrical Data

 

 

Voltage

208/230 Volts

Phase

1

Frequency

60 Hz

Minimum Circuit Ampacity

37 Amps

Recommended Breaker Size

60 Amps

Dimensions

 

 

Liquid Connection Size

3/8”

Suction Connection Size

1 1/8"

Product Height

40”

Product Width

35 1/2”

Product Depth

35 1/2”

Product Weight

306 lbs

Shipping weight

326 lbs

Certifications

 

ETL Listed

Yes

AHRI Certified

Yes

Warranty Information

 

Parts Warranty

Limited* 10 Years

 

 

Goodman Air Handler – AVPTC61D14

The fan coil brings its own features to stand by the heat pump and perform just as efficiently to provide you with the comfort you deserve. First off, it features an all-aluminum evaporator coil which serves as the base of all efficient heat transfer. Furthermore, due to its substantial construction and properties, the air handler resists rust and corrosion.

Next, with the use of variable-speed motors, Goodman has managed to increase the operational efficiency of the air handler as opposed to units that use single or multi-speed motors.

Finally, to support all internal structures as well as the heat kit, the air handler features a Smartframe™ substructure which greatly improves the lateral strength and makes the mounting framework more rigid.

Specifications: -

General Information

 

Type

Air Handler

Refrigerant Type

R-410A

Blower motor

Variable-speed

Motor type

ECM

Configuration

Multi-Position

Installation location

Indoor

UPC

663051564527

Performance

 

Cooling BTU

60000

Capacity

5.0 Tons

Minimum Air flow

1360 CFM

Maximum Air flow

2035 CFM

Electrical Data

 

 

Voltage

208/230 Volts

Phase

1

Frequency

60 Hz

Minimum Circuit Ampacity

9 Amps

Recommended Breaker Size

15 Amps

Dimensions

 

 

Liquid Connection Size

3/8"

Suction Connection Size

7/8"

Product Height

58”

Product Width

24 1/2”

Product Depth

21”

Product Weight

112 lbs

Shipping weight

167 lbs

Liquid Valve Connection Size

3/8"

Suction Valve Connection Size

7/8”

Certifications

 

ETL Listed

Yes

AHRI Certified

Yes

Warranty Information

 

Warranty

5 Years

Parts Warranty

10 Limited years

 

 

Goodman Heat Kit – HKSC20DB

The heat kit used in this system is the perfect companion to the air handler and helps improves its performance by a large margin. The heat kit brings several of its own advantages.

First off, the sequencers installed in the heat kit allow for more precise temperature control. Next, the heat kit supports almost instantaneous staging due to the arrangement of the control circuitry.

In terms of safety, the heat kit is fitted with factory-installed circuit breakers and a fuse link secondary high-temperature limit control.

The heat kit follows the same principles as the air handler when it comes to ease of installation as it features a plug-in wiring harness which makes it a breeze to install into the air handler.

Finally, keeping up with the rest of the system’s durability standards, the heat elements are made of rust-resistant nickel chromium.

Specifications: -

General Information

 

Type

Heat Strip

Product Line

HKS

UPC

663051565456

Performance

 

Electric Heat Capacity

19.2 kW

Electrical Data

 

 

Voltage

240 Volts

Phase

1

Frequency

60 Hz

Dimensions

 

 

Product Weight

9 lbs

Shipping Height

16 41/48”

Shipping Width

15 11/12”

Shipping Length

9 5/24”

Shipping weight

14 lbs

Certifications

 

ETL Listed

Yes

AHRI Certified

Yes

Warranty Information

 

Parts Warranty

Limited* 10 Years

 

Related Items